• HOME
• Life Style
• Aluminum Case Battery Knowledge Introduction

Aluminum batteries are an excellent power carrier and energy storage device. Why do you say so? First of all, aluminum batteries use aluminum as the battery positive material, we all know that aluminum is a highly conductive metal, using aluminum as the battery positive can reduce the consumption of electricity.battery pilot line Secondly, aluminum batteries have a large capacity, usually the size of aluminum batteries can support dozens of amperes of current, which can support the long-term operation of high-power equipment. Moreover, aluminum batteries are also cost-effective and affordable for most customers, so their applications are very widespread.

What are the superior features of aluminum batteries

Because aluminum is a kind of data with more stable function, so the stability of aluminum battery is very good in the process of application, and it can also be said that the ability of aluminum battery is very good, on the one hand, it can save a lot of electricity, on the other hand, this kind of aluminum battery can help people to save a lot of charging time,laser welding machine for lithium ion batteries which improves the convenience of the application to a certain extent.

Aluminum is a material that has some negative electrical properties at high temperatures, so it is very ambitious to choose aluminum batteries. It has a relatively low polarization rate when in use, and the decomposition potential of aluminum batteries is also very good, which is very good compared to the general batteries, and it can also greatly improve the use of time at the end of the battery, and it is also very good to improve the life of the battery.

Aluminum-based batteries will be less expensive than regular batteries, mainly because aluminum is abundant in our metal materials, so it will be less expensive to produce. It is also cheaper to develop,ESS lithium battery machine which can also reduce the cost of the aluminum battery itself to some extent.

One of the biggest advantages of aluminum battery is its non-toxic environmental management function, because of its own composition between the atoms and the social structure of the chain is relatively stable, so it is relatively small damage to our body, and general battery technology compared to then it also has a very has a certain degree of superiority. At the same time for this non-toxic material is very small damage to the environment, no matter in the development process, the production process or in the process of the burden formed to the environment are very low, at least than other similar products market more friendly.

Aluminum battery manufacturing method

1. Preparation of raw materials

First we have to prepare a series of production materials, such as preparing a 100 ml beaker, an aluminum can, as well as a bag of sandpaper and cotton, charcoal clippings. To emphasize the charcoal, because there are many kinds of charcoal, here we need a special kind of low resistance charcoal, we need to make some more. Low resistance charcoal is to burn the wood in the environment with enough oxygen, and then carbonize it in the lack of oxygen, the charcoal which has just been carbonized, we give it enough oxygen to let it burn again, and then the charcoal burns at a very high temperature, and then we can see that the charcoal's appearance will be graphited, and this is the low resistance charcoal that we need.

2.Specific manufacturing process

Next is the specific manufacturing process. First of all, we have to cut the cans, and in order to avoid scratching the cans during the cutting process, we need to wear gloves during the dismantling process. Then, we put a piece of cut aluminum into the beaker. Remember to leave this piece of aluminum for the negative battery terminal and fix the corresponding tip. Then, we have sand and stones to keep sanding the aluminum to remove the insulating material from the aluminum and then let you put it into a pre-prepared beaker, sticking the aluminum to the inside of the beaker and tucking it into a cotton cloth. Let's put some charcoal in the beaker and then compact the charcoal with a stick. Let's insert the graphite electrode slightly into the center, sprinkle the charcoal evenly around the electrode, and then poke the charcoal tightly around the graphite electrode with an abrasive stick. The tighter you poke it, the better the battery will function.

3. Battery shell manufacturing

Then we pour a small amount of salt water into the charcoal to moisten it slightly. Then we always repeat the above two steps, so far the beaker is full of charcoal, always remember to make sure that the graphite electrodes do not come loose during the process. The casing of the battery is to be manufactured and the battery casing is a 100 ml beaker. If you use a smaller beaker, the voltage will be lower, but the current will be amazing.